SES Construction and Fuel Services LLC (SCF) is growing! We are seeking a talented Quality Control Manager/Site Safety & Health Officer to join our dynamic team, a subsidiary of Bristol Bay Construction Holdings LLC (BBCH). Project Scope of Work Design-Build project within the active and occupied medical center to remove and replace the existing PA and paging system with a state-of-the-art PA system utilizing the latest features of PA systems. Project includes the integration of the PA system at Building 5955. Scope includes complex phasing, mass notification system, PA system, demolition, architectural, electrical, and data/communications. Responsibilities: This role entails scheduling, subcontractor management, communication with the client and building occupants, safety and occupational health management, monitoring, assessments, safety site orientation, activity-specific education, and assurance of compliance. • Perform safety and occupational health management, surveillance, inspections, site safety orientation, activity-specific training, and enforcement • Perform safety meetings • Attend the pre-construction conference and pre-work meetings including three-phase inspection meetings • Develop and review preconstruction safety submittals • Review safety submittals for compliance • Implement and enforce accepted Accident Prevention Plans • Review, develop, and enforce subcontractor activity-specific Activity Hazard Analysis (AHA) • Monitor and manage sub-contractor safety and health compliance • Verify safety qualifications • Conduct continuous safety and health inspections, maintain a written log including date of inspection, area/operation inspected, identified hazards, recommended corrective actions, estimated and actual dates of corrections • Conduct mishap investigations and complete required reports • Maintain a safety and health deficiency tracking system monitoring outstanding deficiencies until resolution • Attach safety inspection logs to the Contractors' daily quality control report in RMS and Procore • Maintain the OSHA Form 300 and Daily Production reports for prime and sub-contractors • Maintain safety reference material on the job site • Maintain a list of hazardous chemicals on-site and their material safety data sheets • Review and submit subcontractor submittals • Manage the submittal process with the client • Maintain and update RMS and Procore for applicable project documentation • Perform the USACE QA three-phase inspection process • Develop, submit, and manage both government and DOR RFIs • Perform daily and routine quality control inspections. Document, communicate, and track any deficiencies to completion • Gather and submit all required project closeout information Qualifications: • USACE CQM Certification • OSHA 30 • 1st Aid/AED/CPR • 5 years of experience of similar size and complexity Physical Requirements This position requires the ability to maneuver around work sites, see, hear, and verbally communicate with co-workers and clients. Essential and marginal functions may require maintaining the physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; frequent opportunity to move about and to work outside the office environment for extended periods involving exposure to the elements with weather that will include extreme heat, cold, wind, rain or other inclement weather, walking over rough and uneven surfaces, and routine lifting of up to 35 pounds. If required, must properly use personal protective equipment (PPE) at all times including but not limited to; hard hats, steel-toed boots, eye protection, respiratory protection, and hearing protection. Must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Working Conditions Job is performed in a combination of office and outdoor site locations. The office setting includes exposure to computer screens and requires extensive use of a computer, keyboard, and mouse. Outdoor settings include walking, driving, and carrying supplies throughout all seasons with exposure to heat and cold conditions, and potentially wildlife. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. We are an equal-opportunity employer. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender, or gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. We participate in the E-Verify Employment Verification Program. We are a drug-free workplace. Compensation: $100,000 - $115,000 yearly

• This role entails scheduling, subcontractor management, communication with the client and building occupants, safety and occupational health management, monitoring, assessments, safety site orientation, activity-specific education, and assurance of compliance. • Perform safety and occupational health management, surveillance, inspections, site safety orientation, activity-specific training, and enforcement • Perform safety meetings • Attend the pre-construction conference and pre-work meetings including three-phase inspection meetings • Develop and review preconstruction safety submittals • Review safety submittals for compliance • Implement and enforce accepted Accident Prevention Plans • Review, develop, and enforce subcontractor activity-specific Activity Hazard Analysis (AHA) • Monitor and manage sub-contractor safety and health compliance • Verify safety qualifications • Conduct continuous safety and health inspections, maintain a written log including date of inspection, area/operation inspected, identified hazards, recommended corrective actions, estimated and actual dates of corrections • Conduct mishap investigations and complete required reports • Maintain a safety and health deficiency tracking system monitoring outstanding deficiencies until resolution • Attach safety inspection logs to the Contractors' daily quality control report in RMS and Procore • Maintain the OSHA Form 300 and Daily Production reports for prime and sub-contractors • Maintain safety reference material on the job site • Maintain a list of hazardous chemicals on-site and their material safety data sheets • Review and submit subcontractor submittals • Manage the submittal process with the client • Maintain and update RMS and Procore for applicable project documentation • Perform the USACE QA three-phase inspection process • Develop, submit, and manage both government and DOR RFIs • Perform daily and routine quality control inspections. Document, communicate, and track any deficiencies to completion • Gather and submit all required project closeout information