LABOR ONLY Scope of Work: • ALL HAND LOAD AND DOWNLOAD • GC to provide equipment, materials, permit, and warranty required for project. • Subcontractor to follow all OSHA requirements. • Remove the existing wall and penetration flashings and debris from the roof surface. • Install sheathing substrate at asphalt contaminated base flashing substrates. • Install one (1) layer of mechanically attached poly-iso insulation with the insulation joints staggered. (147 SQ’s).

Sump installation included. • Install mechanically attached 60 mil reinforced TPO membrane in the field of the roof.

The membrane will be allowed sufficient time to “relax” prior to installation.

The membrane sheets will be hot air welded. Each seam will be probed to ensure securement.

The newly installed membrane will be tied into the existing surrounding roof daily. • Install fully adhered 60 mil reinforced TPO membrane at all curbs and walls.

Plates and fasteners will be used to secure the membrane at the base flashings 12” OC.

The membrane will be terminated at all applicable walls with a termination bar and counterflashing. • Install pipe boots, sealant pockets, penetration flashings, universal corners, and t-joints where applicable. • Install cut edge sealant at the exposed edges of all field cut reinforced TPO membrane. • Install TPO clad drip edge metal at the perimeter of the roof system (840’). • Install counterflashing metal (185’). • Install coping cap metal at screen wall (120’). • Install walkways to match the existing layout (225’). • Remove debris and dispose of with GC’s dumpsters. • Perform punch list items determined by manufacturer and GC • Provide 2-year workmanship warranty. • Excludes raising existing rooftop curbs or penetrations. Exclusions: Working on overtime, weekends, holidays; Asbestos removal; Certified payroll, Credit Card Payments, Wet insulation replacement; Temporary roof install; Interior protection, Replacement of collector heads, downspouts, coping metal; Materials; Permit; Rental equipment; Structural repairs.

This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to SRS - Toolbelt.