** Job Summary
**
The HSC Welder willweld repair castings, caps, and core plugs that have surface or internal defects, which makes the casting unacceptable to the customer.
** Essential Functions & Job Responsibilities
**
- Operate and maintain welding table and argon purification equipment.
- Produce NDT quality welds using .045” to .125” diameter weld wire for multiple alloys (Ti-6-4, Ti-6-2-4-2, IN718 etc…)
- Ability to mirror weld and produce NDT quality welds.
- Measure, document and map welds.
- Use and maintain the proper weld wire per alloy.
- Perform necessary adjustments to the power source gauges.Hold argon CFH from 5-30 CFH.Welding 70 - 150 AMP maximum, except for ECY 768 (125-amp max)
- Construct copper back-ups when necessary.
- Record data either manually or by computer as required.
** Basic Qualifications
**
- This position requires a minimum of a high school diploma or general education degree (GED)
- This position requires a minimum of two to four years-related gas tungsten ARC welding (GTAW and TIG) experience and/or training.
- After training, must meet the requirements of Activity Instructions 4000.205 and/or AMS 2694, and must pass the following welders certification test: Repair weld certification to ASME Boiler & PV Code Sec. IX and/or AMS 2694
Must be able to work overtime and weekends as the schedule varies depending on site operational needs; flexibility is required.
You should be proficient in:
- Blueprint Reading
- Welding Setups for Production
Machines & technologies you'll use:
Salary info:
$30.03 - $33.36 / hr