Benefits:

Bonus based on performance

Competitive salary

Employee discounts

Free uniforms

Paid time off

Training & development

Lube Technician

Position Overview During the Full Service Oil Change, the lube technician is responsible for servicing and inspecting the complete underside of the vehicle quickly, safely, and accurately. The lube technician must pay careful attention that only the proper gaskets and drain plugs are installed, the vehicle is greased, the gear boxes checked, the oil filter is tight, and there are no leaks after installation.

Essential Duties and Responsibilities

Work safely, wear safety gear, and keep the work area clean and organized. Protect the pit opening with a bay net when not occupied by the vehicle

Use Echo System

Perform a visual inspection of vehicle undercarriage, document any unusual conditions

Obtain the correct oil filter, Drain oil, and Inspect the oil drain plug and gasket. Replace the bottom-side oil filter, when applicable

Check/fill gearboxes

Perform additional services, such as fuel filters, transmissions, and differentials, when applicable

Assist with performing pressure and leak check

Perform a visual inspection of belts, hoses, and other hood compartment components, and document unusual conditions. Assist with performing pressure and leak check

Lubricate chassis, when applicable Install a tamper seal on all plugs

Assist with final safety and quality check

Other Duties and Responsibilities In addition to the duties listed above, every crew member is responsible for general center maintenance and cleaning duties such as mopping, washing center windows, from the site, and cleaning restrooms. Crew members must attend crew meetings and run errands as required, as well as other duties assigned by a supervisor.

Job Qualifications

Customer service skills Basic literacy (ready, writing, math skills) Verbal communication skills

Ability and license to operate motor vehicles

Ability to properly use mechanical hand tools

Attention to detail

Previous experience or training - Minimum 3 months actual experience or supervised training as a lube technician required

Working Conditions Materials Used: Automotive oils, fluids, and lubricants. Environment: Frequent exposure to outside weather elements, noise, and vehicle exhaust fumes throughout the shift. Physical Activities: Position requires good, corrected vision, and hearing, frequent standing, walking, climbing, stooping, crouching, handling, reaching, and lifting. Benefits/Perks

Discounted Services for Employees

Flexible Hours

Opportunities for Advancement