Opportunity!!!!!!!!!!!!!!!

Want to be a part of a Global Manufacturing Organization on the edge of technology advancement in 5G Wireless Systems?If you are interested in designing the future in this space, please read on.Our customer is Global and is looking for talented engineers right now!

We are currently looking for a:

Title: Principal Wireless Hardware Systems Engineer

Location:Richardson, TX

if you have experience in the development of beamforming and MIMO radio system architectures and antenna array systems for existing 3G/4G wireless standards and developing 5G systems, then you would likely be a great fit for my customer.

At this point, you can either keep reading…..or just call/email me right now!!..

YOU GOT THIS FAR, I THINK YOU ARE INTERESTED!

My name is Frank – 919-386-1010 or frank.degeorge@themavengroup.com

-------------------------------------- DETAILS BELOW-----------------------------------------------------

DUTIES & RESPONSIBILITES:

• Define and capture wireless product performance, interfaces, and environmental requirements. Interpret wireless standards to formulate product requirements.
• Define the product architecture and partition functions to sub-assemblies. Optimize functional partitioning between DSP, mixed signal, and RF sub-sections.
• Allocate and document the requirements of product sub-assemblies.
• Conduct analyses and simulations to ensure and validate that the architecture definition will be compliant to product requirements.
• Conduct analysis and simulation of RF, MIMO, and beamforming behavior from baseband through the antenna and wireless link using Microwave Office, Keysight ADS, MatLab, and SimuLink. Conduct chain analysis to optimize parametric distribution and RF impairment analysis to ensure system dynamic range and channel fidelity. Perform link budget analysis to appropriately scale power amplifier and antenna characteristics.
• Conduct trade studies and analyses to optimize product cost, size, weight, and power consumption while meeting requirements with adequate margin for high yield in production.
• Define the product DVT, engineering test, and production test requirements and coordinate with test engineers to develop appropriate test systems.
• In coordination with product design engineers, develop and maintain product cost, size, weight, and power consumption estimates for the RP.
• Define regulatory, standards, and environmental qualification requirements and coordinate with quality organization to conduct product qualification and certification testing.

QUALIFICATIONS:

• Completed Bachelor's Degree Electrical Engineering with a minimum of twelve (12) years direct experience or a completed Master's degree with eight (8) years of direct experience
• Understanding of receiver and transmitter functional blocks and capabilities including antennas, power amplifiers, filters, duplexers, oscillators, frequency converters, modulators, and demodulators.
• Wide range of experience in RF system phased array and/or beamforming simulation and analysis using Microwave Office, Keysight ADS, MatLab, and Simulink.
• Experience in link budget analysis, chain analysis, EVM analysis, and throughput analysis.
• Experience in analyzing high level system requirements to extract block level hardware and software level requirements.
• Understanding of transmitter and receiver impairments including sources of thermal noise, phase noise, non-linearities, PIM, group delay, intermodulation, spurious and simulation of impairment impact.
• Understanding of wireless receiver and transmitter architectures, antennas, and devices.
• Knowledge of wireless infrastructure architectures and air interface standards including LTE and HSPA.
• Skilled in thorough documentation of requirements and architectures and presentation of radio architecture concepts.
• Excellent verbal and written communication skills
• Excellent organizational skills.